10 Basic Plumbing Tools

There are, however, several specialist plumbing tools you might need for more advanced tasks.

Pliers

Having a good set of pliers in your toolkit is essential, but for plumbing jobs, you might also need a good set of slip-joint pliers for gripping the larger nuts and connectors on some pipework.

A good set of 180mm combination pliers can be useful for pulling split-pins from cisterns, whilst long-nosed pliers are good for gripping the sink outlet grid.

Pipe Wrench

There are several different types of pipe wrench available, but all are designed for gripping larger connectors and fixtures found in plumbing systems.

A standard pipe wrench (Stilson Wrench) will suffice in most domestic situations, although it is worth getting a couple of different sized wrenches if your budget allows.

PTFE Tape

This specialist tape is wound around the threads of fittings through which water will pass, sealing them and making them watertight.

PTFE tape is very cheap and it is certainly worth having some in your toolbox in case you ever need it.

Radiator Key

Radiator Keys are used to release the small square valves on radiators, allowing you to bleed out any air which can build up when the heating system is not used for a prolonged period. As radiator keys cost so little, it is worth buying a spare or two as they are easily lost.

You can buy radiator keys which have a small bottle attached to catch the water that will spill out once the air pocket has been bled out.

Plunger

A simple plunger should be the first thing you turn to in the event that your sink or bath becomes blocked.

You can buy a simple plunger for as little a £1, but you can also buy plungers designed to clean a blocked WC. Another option is a hydrojet plunger which uses a jet of water to clear blockages in sinks and drains.

Sink Auger

You can hire sink and WC Augers, but they are relatively cheap to buy and handy to have in your toolkit. An auger is a flexible steel wire, which is fed into a blocked sink, drain or WC and used to dislodge blockages.

Basin Wrench

This is a wrench specifically designed for loosening and tightening the backnuts of taps. You probably won’t have to use this wrench very often, but when you do need it, it will make removing taps much, much easier.

Immersion Heater Spanner

A large spanner designed for removing and fitting the electrical element of an immersion heater. Can be hired cheaply. This is another plumbing tool which you won’t need very often but is essential for it’s intended task.

Pipe Cutting and Repair Tools

If you plan to install any copper pipework yourself, you will need an additional and more specialist set of tools.

Pipe Repair Clamp

This specialised clamp is used to instantly plug a leak in a pipe.

The clamp consists of a split collar lined with rubber that you fit over the leak and tighten around the pipe to temporarily stop water escaping.

Very useful for stopping a leak whilst keeping the water flowing in the system, meaning that you can take a bit more time working out how to fix the problem permanently.

Pipe Bender

A simple and portable machine to help you create smooth bends in copper pipes.

The machine consists of a curved former and different sized blocks for bending different sizes of pipe. Handy to have if you will be creating lots of bends. Pipe benders can be hired quite cheaply.

Pipe Bending Springs

These come in several sizes depending on the size of pipe you are bending and help to support the inside of the pipe while it is being bent. Using Pipe Bending Springs stops the pipe from flattening as it is bent.

Pipe Cutter

A simple tool for cutting copper pipe. A pipe cutter will create a much more accurate cut than a hacksaw and, if you have several cuts to make, is a lot easier on the arm.

Consists of a fixed blade and an adjustable grip for different sizes of pipe. Copper pipe cutters and plastic pipe cutters differ, so make sure you have the right type for the pipes you need to cut.https://gotinoconstruction.com/construction-equipment/

Wire Wool

Useful for cleaning up the edges of cut pipes and for removing rust from pipework.

Half-Round Metal File

Another useful tool for cleaning the end of cut copper pipes. The rounded side of the file can be used to clean inside the pipe, whilst the flat face can be used to smooth the outside.

Blowtorch

If you are replacing or fitting copper pipes with soldered capillary joints, you will need a blowtorch to heat the solder.